ECU zurücksetzen

[Tom V]

Nachtrag:

das sagt das 2008er Servicemanual zum Anlernen der TPMS bei einer C6:

Place the electronic keyless ignition in the ACCY position.
Using a scan tool, initiate the TPM Learn Mode. A horn chirp will sound indicating the Learn Mode has been enabled. Starting with the left front tire, hold the antenna of the J-46079 aimed upward against the tire sidewall close to the wheel rim at the valve stem location. Press and release the activate button and wait for a horn chirp.
After the horn chirp has sounded, repeat step 3 for the remaining 3 sensors in the following order:
• Right front

• Right rear

• Left rear

After the LR sensor has been learned, a double horn chirp will sound indicating all sensors have been learned.
Place the electronic keyless ignition in the OFF position to exit the learn mode.
After the learn mode has been exited, adjust all tires to the recommended pressures.

bedeutet also dass man einen Tech2 benötigt um den Anlernvorgang zu starten.

Werner, ist das so?
Ich war auch bei der C6 immer davon ausgegangen, dass man den Learn Mode auch so starten kann